Lab 5: Multiplexer Objective A multiplexor (mux) can be used to implement a trut

April 4, 2024

Lab
5: Multiplexer
Objective
A multiplexor (mux) can be used to implement a truth table
by putting constant 1’s or 0’s into the data inputs and putting the variables
into the control (selector) lines of the mux.
The objective of this lab is to use an 8-to-1 mux
(two of them to be specific) to implement a full adder cell
(inputs: CIN, Ai, Bi, outputs: COUT,
Si) in Logisim. Use the multiplexer block provided in
Logism, there is no need to implement the logic gates inside the mux.
Assignment
This lab involves two steps, design and simulation. First, we
will design to truth table to represent our circuit. Then, we will implement
our design in Logisim.
1. Design
Start the problem by filling the truth
table for a full adder. CIN, Ai,
Bi are the full-adder inputs. Refer to the lecture notes, if necessary. COUT, Si
are the desired output of the full
adder. DI0 through DI7 are the data inputs for the multiplexer,
as labeled as A, B, C, … in the lecture slides (for example, see chap3b slide
#10). Find the correct DIi configuration (i.e. 1s and 0s) that generates
the desired COUT output pattern.
Hint: CIN,
Ai, Bi will act as our selector/control lines. You need to set the correct DI
to the desired output.
Cin
Ai
Bi
Cout
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
Cin
Ai
Bi
Si
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
2. Simulation
Design a digital circuit on Logisim that has
three inputs, A, B and Cin and produces the expected output for COUT, Si. Employ the Multiplexer block (found under
Plexers) and Ground and Power blocks (found under Wiring).
For the multiplexers, you can disable the “Enable Pin” and set the “Select
Bits” to the correct number to allow for this design. Set your Data Pins option
to the correct number of bits.
Once you have the necessary components in your simulation, you can connect the
data inputs of your multiplexer to ground or power, based on your design from
part 1. Connect your variable, CIN, Ai, Bi, to the
selector input of your mux.
Label your
input and output and verify that your design works as expected.

← Instructions: In your 4 page analysis, draw upon historical themes and elements

1. We will be analyzing the transistor circuit given below for all possible →

Struggling With a Similar Paper? Get Reliable Help Now.

Delivered on time. Plagiarism-free. Good Grades.

GET YOUR ANSWER

What is this?

It’s a homework service designed by a team of 23 writers based in Carlsbad, CA with one specific goal – to help students just like you complete their assignments on time and get good grades!

Why do you do it?

Because getting a degree is hard these days! With many students being forced to juggle between demanding careers, family life and a rigorous academic schedule. Having a helping hand from time to time goes a long way in making sure you get to the finish line with your sanity intact!

How does it work?

You have an assignment you need help with. Instead of struggling on this alone, you give us your assignment instructions, we select a team of 2 writers to work on your paper, after it’s done we send it to you via email.

What kind of writer will work on my paper?

Our support team will assign your paper to a team of 2 writers with a background in your degree – For example, if you have a nursing paper we will select a team with a nursing background. The main writer will handle the research and writing part while the second writer will proof the paper for grammar, formatting & referencing mistakes if any.

Our team is comprised of native English speakers working exclusively from the United States.

Will the paper be original?

Yes! It will be just as if you wrote the paper yourself! Completely original, written from your scratch following your specific instructions.

Is it free?

No, it’s a paid service. You pay for someone to work on your assignment for you.

Is it legit? Can I trust you?

Completely legit, backed by an iron-clad money back guarantee. We’ve been doing this since 2007 – helping students like you get through college.

Will you deliver it on time?

Absolutely! We understand you have a really tight deadline and you need this delivered a few hours before your deadline so you can look at it before turning it in.

Can you get me a good grade? It’s my final project and I need a good grade.

Yes! We only pick projects where we are sure we’ll deliver good grades.

What do you need to get started on my paper?

* The full assignment instructions as they appear on your school account.

* If a Grading Rubric is present, make sure to attach it.

* Include any special announcements or emails you might have gotten from your Professor pertaining to this assignment.

* Any templates or additional files required to complete the assignment.

How do I place an order?

You can do so through our custom order page here or you can talk to our live chat team and they’ll guide you on how to do this.

How will I receive my paper?

We will send it to your email. Please make sure to provide us with your best email – we’ll be using this to communicate to you throughout the whole process.

Getting Your Paper Today is as Simple as ABC

No more missed deadlines! No more late points deductions!

GET STARTED NOW

}

You give us your assignments instructions via email or through our order page.



Our support team selects a qualified writing team of 2 writers for you.

In under 5 minutes after you place your order, research & writing begins.



Complete paper is delivered to your email before your deadline is up.

Want A Good Grade?

Get a professional writer who has worked on a similar assignment to do this paper for you

Get Started Now